EndlessWait
07-31 04:41 PM
uuuhhh. I can atleast respond to the drink question! use your passport. that is valid proof of age. The law does not require everyone to have a drivers license. Driving is a privilage.......not a right. So, feel free to take your passport in as proof of age and enjoy the drinks :D
Well your temporary license is as good as ur old license. Does it have your picture and DOB..if so then take that along..passport should be avoided as long as not necessary(to prevent it from getting lost).
Well your temporary license is as good as ur old license. Does it have your picture and DOB..if so then take that along..passport should be avoided as long as not necessary(to prevent it from getting lost).
wallpaper 2011 QUOTES/TIWWF/RAINBOW PAGE
Coppertop
10-18 03:13 PM
Unless I am mistaken, the battle is over! (and if it isn't, it should be)
congradulations to Phat7 for winning the "best edited picture"!
congradulations to Phat7 for winning the "best edited picture"!
kcindian
08-03 08:13 PM
Hi,
My EAD expires October 21 2008. I had applied for EAD and AP renewal July 1 and got my LIN numbers by July 7th. The official dates on the USCIS websites are for July 7th. I have not gotten my FP notices yet.
Can anybody tell me based on experience, how long is it taking for NSC to approve renewal cases?
My PD is July 2003 - EB3.
KC Indian
My EAD expires October 21 2008. I had applied for EAD and AP renewal July 1 and got my LIN numbers by July 7th. The official dates on the USCIS websites are for July 7th. I have not gotten my FP notices yet.
Can anybody tell me based on experience, how long is it taking for NSC to approve renewal cases?
My PD is July 2003 - EB3.
KC Indian
2011 taste the rainbow quotes.
w000f
04-22 12:08 AM
How can you check that FBI namecheck has cleared? Call the FBI? I see quite a few people with date of the FBI namecheck on their sig.
more...
Dhundhun
05-22 01:07 AM
hi thanks your input.
what about my Lud ? when i will see lUD ? I took biometric yesterday and my pd is curent now.
I saw your profile. You are from Nepal.
As far as Soft LUD is concerned, there should be one or two after finger printing. (Refer to http://immigrationvoice.org/forum/showthread.php?t=18737 for EAD cases).
Your priority date is current.
I hope that they must have sent for Name Check long ago - this should not be blocking.
What about processing date (Aug 24, 2007 is receipt date)? There was memo from USCIS that it may take over 18 months for processing date to come around Aug 2007. Your I485 i.e. GC can be blocked by processing date.
For example today Nebraska is processing EB based I-485 Application of July 14, 2007. I heard that in a month there was just a change of three days. For Texas, keep on looking at https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
what about my Lud ? when i will see lUD ? I took biometric yesterday and my pd is curent now.
I saw your profile. You are from Nepal.
As far as Soft LUD is concerned, there should be one or two after finger printing. (Refer to http://immigrationvoice.org/forum/showthread.php?t=18737 for EAD cases).
Your priority date is current.
I hope that they must have sent for Name Check long ago - this should not be blocking.
What about processing date (Aug 24, 2007 is receipt date)? There was memo from USCIS that it may take over 18 months for processing date to come around Aug 2007. Your I485 i.e. GC can be blocked by processing date.
For example today Nebraska is processing EB based I-485 Application of July 14, 2007. I heard that in a month there was just a change of three days. For Texas, keep on looking at https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
samcam
05-19 11:34 AM
welcome to our newest member darlynb... 3873 and counting...
more...
i99
08-30 05:29 PM
As of today 8/30 nothing!
I140/I485/EAD/AP - delivered on 02JUL07 sometime around 7AM at NSC signed by R Williams.
Any ideas if it is rejected :(. :confused:
Would you give me the phone number for last name search in the USCIS system? Thanks,
I140/I485/EAD/AP - delivered on 02JUL07 sometime around 7AM at NSC signed by R Williams.
Any ideas if it is rejected :(. :confused:
Would you give me the phone number for last name search in the USCIS system? Thanks,
2010 taste rainbow quotes.
va_il
02-13 08:57 PM
Thanks a lot for the information. Since I had sent my renewal application via courier, I never got any pick up slip. I have paid $15 for mailing service. What I am worried is that even if I drive 5 hours to pick up, if they haven't processed my application (its close to 4 weeks now since I have applied), I will run out of options. On the website they claim that they will process in 5 business days. I must have tried close to 5 different phone numbers multiples times for past week or so. I have also emailed and faxed my query multiple times. Same result - No response at all. I just don't get how work is done at the embassy.
I have no idea about all these complaints. I gave my passport for renewal on last thursday and i picked up new one on friday. Never heard of delays on this issue.
I have no idea about all these complaints. I gave my passport for renewal on last thursday and i picked up new one on friday. Never heard of delays on this issue.
more...
sc3
08-28 12:43 PM
When they say "Continued Heavy Demand", what does it mean? Howcome there can be demand with Older Priority Dates? Labor Substitution is no longer possible so there can't be new demand with Older PD. So howcome PD goes back? Does anybody have insight into that?
Yes, I can profess a guess, but that does not account for the statement about "A formal decision determination of the October cut-off dates will not be possible until early September"
With all the labor certification being sold on or around June 2007, old labors started getting used up. These applications are probably trickling in during the course of the year, and may have seen a huge rush when they announced that they are going to make EB3 unavailable. Therefore, their earlier assumption that they can move forward was wrong. On the other hand, they probably totally messed up in counting the number of cases they already had on hand.
I dont agree to the continued "heavy demand" comment. What demand? Were they accepting applications when the queue was already closed for the year? If not, there is no case of "heavy demand", unless there was a bunch of applications around Dec02-Mar03 for China but as usual they used a 3 year old to count the number applications
Yes, I can profess a guess, but that does not account for the statement about "A formal decision determination of the October cut-off dates will not be possible until early September"
With all the labor certification being sold on or around June 2007, old labors started getting used up. These applications are probably trickling in during the course of the year, and may have seen a huge rush when they announced that they are going to make EB3 unavailable. Therefore, their earlier assumption that they can move forward was wrong. On the other hand, they probably totally messed up in counting the number of cases they already had on hand.
I dont agree to the continued "heavy demand" comment. What demand? Were they accepting applications when the queue was already closed for the year? If not, there is no case of "heavy demand", unless there was a bunch of applications around Dec02-Mar03 for China but as usual they used a 3 year old to count the number applications
hair quotes about rainbow. Life Insurance Competitive Quotes From Rainbow,
rbharol
08-22 02:14 PM
Any US postgraduate degree + 3 years prior to I-140/I-485. Read the text of the bill for more details.
Thanks. Moreover the fact that the unused visas shall be carried forward too should help.
Specially the ones unused from 2001 to 2005.
Does anybody know was is the number of unused visas from 2001 to 2005.
Thanks. Moreover the fact that the unused visas shall be carried forward too should help.
Specially the ones unused from 2001 to 2005.
Does anybody know was is the number of unused visas from 2001 to 2005.
more...
ameryki
08-12 12:34 PM
Efiled for my wife May 17th to NSC got LIN number. No update so far. Next week will be 90 days.
hot quotes, rainbows, roses
desi_scorpion
08-10 12:01 PM
Called the NSC on wed and today....and was told that I need to wait 90 days from the date of submitting the 485 to receive a receipt number. Expecting something similar in todays update.....thats a pretty long wait.
more...
house quotes about rainbow. repo man
michael_trs
11-18 11:37 PM
h1techSlave,
I saw that priority date for EB2 (all other countries) now is current, while for EB3 is May 2005.....
Does it mean that when my LC is ready I will have to wait my priority date for approximately 3 years?
I saw that priority date for EB2 (all other countries) now is current, while for EB3 is May 2005.....
Does it mean that when my LC is ready I will have to wait my priority date for approximately 3 years?
tattoo quote rainbow Gives
prabasiodia
08-01 11:13 AM
All they need to do is add "text message" functionality and a new Cascaded Style Sheet.
I sincerely hope that's not the case though. :rolleyes:
If you look at the new features list:
A customer-centric home page that provides applicants with a “one-stop shop” of immigration services information.
Simplified navigation and improved search capability.
Enhanced customer service tools including expanded Case Status Online with both email and text functionality.
Information that is written clearly and meets the needs of our customers.
It is pretty vague. They may just make some cosmetic changes for the existing website. I dont see anything new here. I hope they prove me wrong!
I sincerely hope that's not the case though. :rolleyes:
If you look at the new features list:
A customer-centric home page that provides applicants with a “one-stop shop” of immigration services information.
Simplified navigation and improved search capability.
Enhanced customer service tools including expanded Case Status Online with both email and text functionality.
Information that is written clearly and meets the needs of our customers.
It is pretty vague. They may just make some cosmetic changes for the existing website. I dont see anything new here. I hope they prove me wrong!
more...
pictures taste rainbow quotes
karn.anand
11-02 07:32 AM
i Cant see my post here. Here is the link..http://www.kirupa.com/forum/showthread.php?t=337838
dresses taste the rainbow quotes.
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
more...
makeup quotes about rainbow. myspace
som_yad
08-14 09:00 PM
Thank you ksrk for your reply on validity of I-94.
I know I become paroled if i enter using AP.
As my H1 extension is pending.. What happens to my H1B status when I return in following scenareos?
1) If H1 approval comes after I arrive
2) If H1 is approved when I am in India.
Thanks
I know I become paroled if i enter using AP.
As my H1 extension is pending.. What happens to my H1B status when I return in following scenareos?
1) If H1 approval comes after I arrive
2) If H1 is approved when I am in India.
Thanks
girlfriend taste rainbow quotes. taste
shivarajan
03-17 08:00 PM
EAD etc. are only supplementing documentation which the underwriting agency may or may not look. The real thingy is ur cashdown, credit score (time of accounts in good standing) & W2's. We went with ING with absolutely no problems whatsoever (yes the market was not good at that time) and got a better interest rate with no questions asked (ead, gc etc.), we both ver in h1's when v applied!
hairstyles Quote of the day
WillIBLucky
06-21 12:08 PM
Congratulations!!!!!
Would you plz confirm us on the Birth Certificate?
Me & my husband got our Birth Certificates in 2005 with all the correct birth details. Do you think we might still need affidavits for Late Registration of Birth?Please throw some light on this as there's lot of confusion going on this.
You would need afidavits from your parents and a close relative. IF you dont have a birth certificate with your name, registered on the day you were born and the certificate is dated close to your dob then you WILL need afidavits.
It very simple, just send the format by mail to your parents and ask them to buy stamp papers and get it typed and then sign in front of notory and notory will attest and sign. Then ask them to scan it and send it to you. You just take a print out and give it to your lawyer including your birth certificate you took in 2005.
Good Luck!
Would you plz confirm us on the Birth Certificate?
Me & my husband got our Birth Certificates in 2005 with all the correct birth details. Do you think we might still need affidavits for Late Registration of Birth?Please throw some light on this as there's lot of confusion going on this.
You would need afidavits from your parents and a close relative. IF you dont have a birth certificate with your name, registered on the day you were born and the certificate is dated close to your dob then you WILL need afidavits.
It very simple, just send the format by mail to your parents and ask them to buy stamp papers and get it typed and then sign in front of notory and notory will attest and sign. Then ask them to scan it and send it to you. You just take a print out and give it to your lawyer including your birth certificate you took in 2005.
Good Luck!
ssdtm
03-22 01:02 AM
My EB-3 priority date is 10/17/2004 Non-PERM. My I-140 was filed in May 2007 and is approved in Aug 2008. Meanwhile I also filed for I-485 for me and my spouse (thanks to DOS Visagate June 2007 event)
I am also on H1B 6th year. Looking at the delay in the EB3 I am contemplating if there is any risk in filing for EB-2.
---- No risk in filing in EB2
Since I came into US in 2003, I moved up in the company ranks few times and am in managerial position. Am I eligible for interfiling my GC case to EB2 without losing original priority date.
---- Yes you are. It is not only your qualifications that matter but Job MUST demand all those qualifications + exp to justify EB2. Many cos do not file in EB2 even if you are PHD because job does not need that.
Another way is file the EB2 485 in CP. I was told by a reputed lawyer that interfiling is not the only way to use earlier PD.
Is it mandatory that I should be eligible for EB2 criteria (like 5 years experience or Post Grad Degree) as on original Priority Date for interfiling to work.
---- There is lack of clarity on this. I have read lawyer opinions on both sides.
Any advice is appreciated. I will initiate it in our company. Also any potential risks and RFEs I should expect?
Thanks
----
I am also on H1B 6th year. Looking at the delay in the EB3 I am contemplating if there is any risk in filing for EB-2.
---- No risk in filing in EB2
Since I came into US in 2003, I moved up in the company ranks few times and am in managerial position. Am I eligible for interfiling my GC case to EB2 without losing original priority date.
---- Yes you are. It is not only your qualifications that matter but Job MUST demand all those qualifications + exp to justify EB2. Many cos do not file in EB2 even if you are PHD because job does not need that.
Another way is file the EB2 485 in CP. I was told by a reputed lawyer that interfiling is not the only way to use earlier PD.
Is it mandatory that I should be eligible for EB2 criteria (like 5 years experience or Post Grad Degree) as on original Priority Date for interfiling to work.
---- There is lack of clarity on this. I have read lawyer opinions on both sides.
Any advice is appreciated. I will initiate it in our company. Also any potential risks and RFEs I should expect?
Thanks
----
evildead
01-25 07:23 PM
do you know the reason why it was rejected (i140 I mean)
No comments:
Post a Comment