Winner
05-16 09:56 AM
Left voice mails
wallpaper Tribal Tattoo Designs – How To
ItIsNotFunny
11-17 11:41 AM
Don't need to be hard on him. There could be genuine friend or there are reasons why people don't want say its them.
Why are you so scared of posting by saying that this problem is with you. Why do you have to bring your friend in. If it is really for your friend, then why cant he come and ask himself.
I wish I had a friend like you who will find answers to my immigration problems ....
Why are you so scared of posting by saying that this problem is with you. Why do you have to bring your friend in. If it is really for your friend, then why cant he come and ask himself.
I wish I had a friend like you who will find answers to my immigration problems ....
.jpg "tribal heart tattoo designs.")
Slowhand
07-18 09:32 AM
See below:
Taken from www.immigration-law.com
07/18/2007: Reinstatement of Original July Visa Bulletin and Uncertain Impact on Pre-July "Tagged" EB-485 Applications and Processing Time of I-485 Applications in the Future
The other EB-485 waiters will turn out to be a big victim to the DOS/USCIS decision yesterday. Since there will be no visa numbers available until October 1, 2007, the people whose EB-485 applications were "not tagged" before July 1 will experience a tremendous delay in obtaining the green card. When it comes to the delays in obtaining the green card approvals, the new filers in July and those filers before August 17 will also witness a tremendous delays and will have to endure a long and long journey to leave the pipeline of the green card process. Why? As we reported quite earlier in this visa fiasco, we even estimated that approximately 750,000 individual EB-485 applications can be poured into the system during this unusual period of visa number availability as affected by the upcoming filing fee increases and more importantantly the anticipated potential huge visa number retrogression ahead during when they may not be able to file their 485 applications because of the retrogression. After all, the system has only 140,000 numbers for the entire EB categories for each year. Go figure! What would look like the waiting time for the current EB-485 filers and the current EB-485 filers before July 1, 2007!
Mr.Oh's opinion is flawed on many counts but most of all assuming what he says is correct, this delay will be/would have been the same either way. i.e the 750000 applicants will apply all at once or at regular intervals. The bright side is that spouses will get their EADs.
Mr.Oh also assumes that USCIS processing procedure and speed will not change.
It sounds like fluff reporting that popular media does. All fluff, no value.:D
Taken from www.immigration-law.com
07/18/2007: Reinstatement of Original July Visa Bulletin and Uncertain Impact on Pre-July "Tagged" EB-485 Applications and Processing Time of I-485 Applications in the Future
The other EB-485 waiters will turn out to be a big victim to the DOS/USCIS decision yesterday. Since there will be no visa numbers available until October 1, 2007, the people whose EB-485 applications were "not tagged" before July 1 will experience a tremendous delay in obtaining the green card. When it comes to the delays in obtaining the green card approvals, the new filers in July and those filers before August 17 will also witness a tremendous delays and will have to endure a long and long journey to leave the pipeline of the green card process. Why? As we reported quite earlier in this visa fiasco, we even estimated that approximately 750,000 individual EB-485 applications can be poured into the system during this unusual period of visa number availability as affected by the upcoming filing fee increases and more importantantly the anticipated potential huge visa number retrogression ahead during when they may not be able to file their 485 applications because of the retrogression. After all, the system has only 140,000 numbers for the entire EB categories for each year. Go figure! What would look like the waiting time for the current EB-485 filers and the current EB-485 filers before July 1, 2007!
Mr.Oh's opinion is flawed on many counts but most of all assuming what he says is correct, this delay will be/would have been the same either way. i.e the 750000 applicants will apply all at once or at regular intervals. The bright side is that spouses will get their EADs.
Mr.Oh also assumes that USCIS processing procedure and speed will not change.
It sounds like fluff reporting that popular media does. All fluff, no value.:D
2011 sacred heart tattoo designs
wleebrown
November 14th, 2007, 07:26 AM
Keith,
My sensors always seem to be dust magnets ... probably because I shoot with mostly primes and switch lenses a lot outdoors and in places that the lens just probably shouldn't be off the camera.
The site Mats recommends looks like it might have some good instructions, but the best advice I've been given was buy a Rocket blower (it's just a big bulb type blower that's shaped like a rocket for about $20). Most of the time 3 or 4 blasts of air with the rocket blower does the trick. (Never use canned air by the way.) And be careful how far you insert the end of the blower into your camera once the mirror is locked.
Shortly after buying a new 30D I got a little overzealous and smeared the end of the blower across the sensor. After pulling my heart back out of my feet, because I was certain I'd destroyed my new camera, and reading several sites like the one above, I violated all the rules and used standard cotton swabs my wife had in the bathroom (because it was the weekend and I live in the country where camera stores and medical supply shops are not close by or open) and I was able to easily clean the smear I had created across the sensor. The only problem I've had since was more dust.
It's kind of scary the first time, but in reality it is not brain surgery. If you use due care and the right kinds of material, you should have no problem removing the dust yourself. At $75 a cleaning, if I took my camera in every time I had a little dust I would have to give quit shooting.
Blessings,
Lee
My sensors always seem to be dust magnets ... probably because I shoot with mostly primes and switch lenses a lot outdoors and in places that the lens just probably shouldn't be off the camera.
The site Mats recommends looks like it might have some good instructions, but the best advice I've been given was buy a Rocket blower (it's just a big bulb type blower that's shaped like a rocket for about $20). Most of the time 3 or 4 blasts of air with the rocket blower does the trick. (Never use canned air by the way.) And be careful how far you insert the end of the blower into your camera once the mirror is locked.
Shortly after buying a new 30D I got a little overzealous and smeared the end of the blower across the sensor. After pulling my heart back out of my feet, because I was certain I'd destroyed my new camera, and reading several sites like the one above, I violated all the rules and used standard cotton swabs my wife had in the bathroom (because it was the weekend and I live in the country where camera stores and medical supply shops are not close by or open) and I was able to easily clean the smear I had created across the sensor. The only problem I've had since was more dust.
It's kind of scary the first time, but in reality it is not brain surgery. If you use due care and the right kinds of material, you should have no problem removing the dust yourself. At $75 a cleaning, if I took my camera in every time I had a little dust I would have to give quit shooting.
Blessings,
Lee
more...
bkarnik
05-24 05:01 PM
You're right on logiclife .... our first concern is whether frist and reid start fighting again. one baby step at a time.....
One good thing I have noticed....I donot know why but Tancredo is not screaming as much from the rooftops right now. I guess he may have realized that the house just overdid things a bit and tipped the balance.
Call me paranoid...but I am wondering the exact same thing that how come Tancredo, et.al. are not making any noises...if you remember last time these congressmen were making a lot of noise and the bill went nowhere, now in hindsight, I think internally they knew that the bill will not pass the senate at that time and were making the most of it. Similarly, the silence is ominous because it means they probably have some surprises lined up at the conference. BTW, do we know who will be on the conference from both the Senate as well as the house? Also, are the conference proceedings publicised?
One good thing I have noticed....I donot know why but Tancredo is not screaming as much from the rooftops right now. I guess he may have realized that the house just overdid things a bit and tipped the balance.
Call me paranoid...but I am wondering the exact same thing that how come Tancredo, et.al. are not making any noises...if you remember last time these congressmen were making a lot of noise and the bill went nowhere, now in hindsight, I think internally they knew that the bill will not pass the senate at that time and were making the most of it. Similarly, the silence is ominous because it means they probably have some surprises lined up at the conference. BTW, do we know who will be on the conference from both the Senate as well as the house? Also, are the conference proceedings publicised?
andy garcia
07-18 10:08 AM
Hello all, my lawyer is charging $600 for EAD (including uscis fees), I heard from one of my friends that EAD can be applied by yourself.
Has anyone done that?
Is it easy to do that?
Here is:
e-file 765(180 $)
Send copy of 485 along with printout of receipt
Wait for FP appointment
Done(got cards 40 days later)
I already did it for wife, son and myself.
Saved about 1500$
Has anyone done that?
Is it easy to do that?
Here is:
e-file 765(180 $)
Send copy of 485 along with printout of receipt
Wait for FP appointment
Done(got cards 40 days later)
I already did it for wife, son and myself.
Saved about 1500$
more...
cjain
08-10 03:45 PM
from AILA
http://www.aila.org/content/fileviewer.aspx?docid=23079&linkid=164409
http://www.aila.org/content/fileviewer.aspx?docid=23079&linkid=164409
2010 tribal heart tattoo designs.
pradeep_s
12-19 11:41 PM
Hi,
I have my I-140 approved in EB2 category (applied in Feb 06), at present
in H1b (paperwork valid till Nov. 07). I would like to know
whether there are any problems in going to India and getting
my visa stamping done.
Are there any legal issues - like you cannot travel abroad while your I-140 is
approved and do not have AP and EAD ?? (I cannot apply for I-485 and also AP/EAD as
I have filed my I-140 petition in Feb 06; and the processing date for EB2 (India)
is Jan 03).
Any suggestions/comments/advice greatly appreciated.
pradeep
I have my I-140 approved in EB2 category (applied in Feb 06), at present
in H1b (paperwork valid till Nov. 07). I would like to know
whether there are any problems in going to India and getting
my visa stamping done.
Are there any legal issues - like you cannot travel abroad while your I-140 is
approved and do not have AP and EAD ?? (I cannot apply for I-485 and also AP/EAD as
I have filed my I-140 petition in Feb 06; and the processing date for EB2 (India)
is Jan 03).
Any suggestions/comments/advice greatly appreciated.
pradeep
more...
immigrationvoice1
10-05 12:05 PM
What does your online status say? Mine changed today and says the following:
Current Status: Approval notice sent.
On October 3, 2007, we mailed you a notice that we have approved this I131 APPLICATION FOR USCIS TRAVEL DOCUMENT.
No idea what it means though. If you are a July 2nd filer, the above surely should not mean I am about to receive mine anytime now...Confused:confused:
Current Status: Approval notice sent.
On October 3, 2007, we mailed you a notice that we have approved this I131 APPLICATION FOR USCIS TRAVEL DOCUMENT.
No idea what it means though. If you are a July 2nd filer, the above surely should not mean I am about to receive mine anytime now...Confused:confused:
hair Heart with Dagger Tattoo
jliechty
April 3rd, 2005, 08:51 PM
You can do a lot in this instance with a single well-exposed (highlights to the right, but not blown out) RAW file from a low-noise camera (e.g. anything but my D1). ;)
What you must do is to go through the RAW conversion process twice, making two files: one with the highlights placed where you want them (don't worry about the shadows), and another with the shadows brought up to the level that you'd like (the highlights will be blown out in this image). Now, stack the two in one image as two layers, and use a layer mask on the upper image to "paint" where the bottom one should show through.
This is explained in a tutorial (http://www.luminous-landscape.com/tutorials/blended_exposures.shtml) over at the Luminous Landscape. Given that he was using film when he wrote that, he included a bit on aligning the two images, which you won't need to worry about because both of your images came from the same photo. If you have any more questions, I'd be glad to help, or I'm sure one of our other members who's forgotten more about Photoshop than I'll ever know could help you even better. :)
Edit: $#%^, Gary beat me to it with the LL tutorial. Nevertheless, double RAW conversion works well [not quite, but good enough if you can't go back to do it again] with the same method outlined therein.
What you must do is to go through the RAW conversion process twice, making two files: one with the highlights placed where you want them (don't worry about the shadows), and another with the shadows brought up to the level that you'd like (the highlights will be blown out in this image). Now, stack the two in one image as two layers, and use a layer mask on the upper image to "paint" where the bottom one should show through.
This is explained in a tutorial (http://www.luminous-landscape.com/tutorials/blended_exposures.shtml) over at the Luminous Landscape. Given that he was using film when he wrote that, he included a bit on aligning the two images, which you won't need to worry about because both of your images came from the same photo. If you have any more questions, I'd be glad to help, or I'm sure one of our other members who's forgotten more about Photoshop than I'll ever know could help you even better. :)
Edit: $#%^, Gary beat me to it with the LL tutorial. Nevertheless, double RAW conversion works well [not quite, but good enough if you can't go back to do it again] with the same method outlined therein.
more...
gcformeornot
01-09 03:01 PM
EB2 India "U"
EB3 India couple of months ahead in 2001.
EB3 India couple of months ahead in 2001.
hot The small heart tattoo design
glus
05-31 09:18 AM
<><><><><>
more...
house and flowers tattoo design
hydubadi
02-03 12:32 PM
^^^^Bump^^^
tattoo Heart Tattoo Design
AttelsActuasy
02-27 11:53 AM
pozycjonowanie (http://www.clpik-studio.com)
more...
pictures Heart and Flowers Tattoo
lord_labaku
11-17 12:04 PM
Yes. layoffs and labor certs dont mix well. esp. if an american or GC holder worker with the same position as u is laid off.
It does make sense at a labor cert level...but if u look at this long drawn GC process of 6+ years....it is unfair to the potential immigrant as he is seeking GC for future employment. This is when a point based system like Canada does makes sense....even when economy is down...u continue to immigrate people who are still needed because of their critical skills.
It does make sense at a labor cert level...but if u look at this long drawn GC process of 6+ years....it is unfair to the potential immigrant as he is seeking GC for future employment. This is when a point based system like Canada does makes sense....even when economy is down...u continue to immigrate people who are still needed because of their critical skills.
dresses wrist-heart-tattoo-design
Libra
08-31 12:01 PM
All midwest members please go to this thread and cast your vote
http://immigrationvoice.org/forum/showthread.php?t=12599
http://immigrationvoice.org/forum/showthread.php?t=12599
more...
makeup heart tattoo designs.
beemboy
05-31 10:11 AM
This is my first time $200 contribution for this great organization. Keep up the good work guys!!
Google Checkout #778027030093989
Google Checkout #778027030093989
girlfriend Labels: Heart Tattoo Designs
WeShallOvercome
07-30 03:28 PM
Do you get the FP notice by email or snail mail?
snail mail
snail mail
hairstyles rose heart tattoo tribal
texanguy
02-02 01:45 PM
previously discussed.
check out my post and gc28262 's response in the following link
http://immigrationvoice.org/forum/showthread.php?t=23111&page=2
I believe you need more than 6months of stay for it to be called as continous presence. Anyone shed some light.
check out my post and gc28262 's response in the following link
http://immigrationvoice.org/forum/showthread.php?t=23111&page=2
I believe you need more than 6months of stay for it to be called as continous presence. Anyone shed some light.
kumar1
06-14 03:03 PM
God bless Raj. I am not sure if every story ends like this particular one.
Refer this:
Case Study: Upgrade from EB3 to EB2 (http://www.imminfo.com/News/Newsletter/2010-06/case_study_upgrade_from_eb3_to_eb2.html)
Refer this:
Case Study: Upgrade from EB3 to EB2 (http://www.imminfo.com/News/Newsletter/2010-06/case_study_upgrade_from_eb3_to_eb2.html)
gclongwaytogo
10-19 09:42 AM
July 3rd filer....LIN# (though I-140 approved at TSC)
Receipt Date: July 3
Notice Date: October 11
EAD Card: Waiting
No FP notice yet
I-140 approved: TSC
Originating Issuer of I-485 and I-765 : NSC
Receipt Date: July 3
Notice Date: October 11
EAD Card: Waiting
No FP notice yet
I-140 approved: TSC
Originating Issuer of I-485 and I-765 : NSC
No comments:
Post a Comment