gg_ny
04-21 11:47 AM
http://hammondlawgroup.blogspot.com/
Putting this all together HLG is slightly raising our latest estimate. We�re willing to print that there is a 60% chance that either CIR or Bridge legislation is passed and signed by the President by August 1. Whenever a bill is passed it will likley take an additional 30-60 days before the first visas are issued.
Does anyone remember/know what HLG was willing to print about the CIR's chances last time over (in 2006)?
Putting this all together HLG is slightly raising our latest estimate. We�re willing to print that there is a 60% chance that either CIR or Bridge legislation is passed and signed by the President by August 1. Whenever a bill is passed it will likley take an additional 30-60 days before the first visas are issued.
Does anyone remember/know what HLG was willing to print about the CIR's chances last time over (in 2006)?
wallpaper +powerpoint+presentations
go_guy123
02-15 01:20 PM
If each state in India were a country
There would have been no backlog.
That is hypothetical thinking, talking from a** etc and a waste of time but yes ROW backlog would have increased instead.
There would have been no backlog.
That is hypothetical thinking, talking from a** etc and a waste of time but yes ROW backlog would have increased instead.
shana04
01-09 12:00 AM
We have a company lawyer. Only thing I have is 485 receipts, FP notice, EAD and AP.
Nothing has been shared with us till I-140 approval.
Upon my demands, all I got is my I-140 application number. My HR dept has a strict position that I-140 & LC are employer documents and it will NOT BE Shared with employees.
I still doubt that USCIS will expect me to have these documents.
Any ideas How can I know job description? Can I call USCIS? dont' think they will entertain?
I am about to file for H1B extension. Is there anything here that can give me some idea about job description? I guess H1B and LCA job description should be same. isn't it???
One way to find out is, when you filled in your labor application (before PERM). Your attorney, just before filing for labor should have send you some papers to sign and fax it or mail it through post.
There either you or your attorney shold have filled in job descriptions and job details (this should be the latest experience you had before filing the labor).
One more way to find out, while filling in your I 140 petition if your attorney has send you documents to verify. Then you would find Job title specified in there.
After you filed for labor and and if you have specified your address in labor, then a copy of certified labor goes to that address ( I have received one, it said a copy of the certified labor has been CC'd to Employer and attorney)
To my knowledge that would be your best bet to find out job description and job title with out having labor cert in hand as I 140 approval does not say any thing.
Good luck.
Nothing has been shared with us till I-140 approval.
Upon my demands, all I got is my I-140 application number. My HR dept has a strict position that I-140 & LC are employer documents and it will NOT BE Shared with employees.
I still doubt that USCIS will expect me to have these documents.
Any ideas How can I know job description? Can I call USCIS? dont' think they will entertain?
I am about to file for H1B extension. Is there anything here that can give me some idea about job description? I guess H1B and LCA job description should be same. isn't it???
One way to find out is, when you filled in your labor application (before PERM). Your attorney, just before filing for labor should have send you some papers to sign and fax it or mail it through post.
There either you or your attorney shold have filled in job descriptions and job details (this should be the latest experience you had before filing the labor).
One more way to find out, while filling in your I 140 petition if your attorney has send you documents to verify. Then you would find Job title specified in there.
After you filed for labor and and if you have specified your address in labor, then a copy of certified labor goes to that address ( I have received one, it said a copy of the certified labor has been CC'd to Employer and attorney)
To my knowledge that would be your best bet to find out job description and job title with out having labor cert in hand as I 140 approval does not say any thing.
Good luck.
2011 Our Lord Powerpoint Slides
GCwaitforever
10-04 05:45 PM
Learn Dutch. That is more useful than French there.
more...
Pallavi79
02-21 11:43 PM
:)
speddi
09-12 04:35 PM
Hi,
I am applying for AP Renewal for myself and my wife. Can someone please send me the information on the following.
1. AP is expiring on September 20th. Can I file even after the expiry of the AP?
2. I am in AL.So, I need to be sending the application to Texas Service Center. But I am confused on where to send the documents? I will be sending by FedEx or UPS?
3. When I prepare the documents, do I enter Part 9, Signature of person preparing the form, if other than the application?
4. Last year our attorney filed the application and I have a copy of that application. I see "Notice of Entry of Appearance as Attorney or Representative" form. I am sure I dont have to file that now but do I need to do anything so that I get the receipt/approval notices instead of going to the Attorney Office?
Thank you.
I am applying for AP Renewal for myself and my wife. Can someone please send me the information on the following.
1. AP is expiring on September 20th. Can I file even after the expiry of the AP?
2. I am in AL.So, I need to be sending the application to Texas Service Center. But I am confused on where to send the documents? I will be sending by FedEx or UPS?
3. When I prepare the documents, do I enter Part 9, Signature of person preparing the form, if other than the application?
4. Last year our attorney filed the application and I have a copy of that application. I see "Notice of Entry of Appearance as Attorney or Representative" form. I am sure I dont have to file that now but do I need to do anything so that I get the receipt/approval notices instead of going to the Attorney Office?
Thank you.
more...
smuggymba
11-22 07:22 PM
have a US visa stamped and has not expired, they will not let you board a plane to UK.
If you have GC, then there is no need for transit visa. If you are on AP, then you will need transit visa.
I think in the 50s and 60s, an Indian passport holder could enter the UK based on holding a commonwealth passport. Wonder why that policy changed? ;)
do we need a UK visa even if we have a valid stamped US passport?
If you have GC, then there is no need for transit visa. If you are on AP, then you will need transit visa.
I think in the 50s and 60s, an Indian passport holder could enter the UK based on holding a commonwealth passport. Wonder why that policy changed? ;)
do we need a UK visa even if we have a valid stamped US passport?
2010 PowerPoint Background 4
coopheal
12-28 03:45 PM
Yes it will be a while before it reaches Jan 03 (my guessestimate about 2 years). I wanted to get some idea on why EB2 got stuck around Jan 03 when it flew past Apr 01 deadline.
Even if EB3 moves slowly now it would in a year will be in mid 2002 or latter. And then in Mid 2003 in two years. which would cover my priority date. However if it got stuck to some other date (like EB2 in Jan 2003) it would be diffrent story.
Even if EB3 moves slowly now it would in a year will be in mid 2002 or latter. And then in Mid 2003 in two years. which would cover my priority date. However if it got stuck to some other date (like EB2 in Jan 2003) it would be diffrent story.
more...
lifestrikes
06-03 05:18 PM
Refer to Page 5 of Neufled Memo (http://www.uscis.gov/USCIS/Laws/Memoranda/2010/H1B%20Employer-Employee%20Memo010810.pdf)
It shows self employment and H1B cannot prove employer-employee relationship.
>>If so, H1B visa requires proof of salary, whereas owners in an LLC cannot be employed by the LLC. Any ideas on how to solve this paradox?
My understanding after reading Nolo's LLC guide is that when you file LLC, if you don't state who will be Members and Managers. then everyone by default will be Members and Managers. If you are going to work, then you should be stated as Manager in Operating agreement.
It shows self employment and H1B cannot prove employer-employee relationship.
>>If so, H1B visa requires proof of salary, whereas owners in an LLC cannot be employed by the LLC. Any ideas on how to solve this paradox?
My understanding after reading Nolo's LLC guide is that when you file LLC, if you don't state who will be Members and Managers. then everyone by default will be Members and Managers. If you are going to work, then you should be stated as Manager in Operating agreement.
hair PowerPoint presentations
floridasun
01-12 11:22 AM
dude.. stop spitting garbage especially when u dont know my situation
more...
Antonio Trivelin
September 3rd, 2006, 07:41 PM
Nice job, Antonio. I like both but prefer the second. :)
Tks a lot. I will make anothers, i love this style HDR :)
Tks a lot. I will make anothers, i love this style HDR :)
hot PowerPoint Slide Templates
drsilver
July 5th, 2006, 05:27 PM
OK, I've got it all figured out. (I confess, I've got nothing figured out, but it felt good to write that.)
Spent the long weekend reading up on this digital camera stuff and I've decided to go Nikon. Made this decision because I've got a relationship with their systems and some good, old glass that can still be used. Maybe not the best situation with new technology, but certainly not useless.
My quandary now is whether to go with a new D200 or a good used D70. In the past, that would have been an easy decision. When these were the tools of my trade, I was always shooting with one-generation-old technology. When everyone else was shooting with F3s, I used F2s. When the F4 came out, I snatched up a couple of discarded F3s. Made plenty of fine pictures that way.
My concern now is the pace of technology change. Digital photography is in its infancy. One reviewer's opinion is that 1 digital year is about 25 human years. So, 4-year-old digital technology is from the stone age.
Is that really true? It sounds like the D70 is a pretty good, battle-tested box which, over the last few years, has made a ton of perfectly fine images. Is it worth spending twice the money to get the newest and bestest?
One thing that caught my eye is that it sounds like the D200 is quite a bit sturdier than its older brother. I used to beat the snot out of my equipment back in the day, so that was important. Now, probably, not so much. I did read, though, that all the buttons and doors and every possible opening in the D200 is gasket sealed. I live in Seattle, so any camera I own is gonna get rained on. That's a big selling point for me.
I also read that the D200 will also work a little better with my old manual-focus lenses; mainly in the metering department. But neither will let you swap out the viewfinder glass, so I'm stuck with straight ground glass. That was never easy to focus on and my eyes aren't any younger. Guess I'll eventually be investing in at least a few AF lenses.
Tip (or rant, depending on your disposition) Of the Day
(I'm trying to give as much as I take on the board):
As far as camera metering is concerned, it doesn't interest me all that much. If you're at all serious about photography, get yourself a hand-held incident meter. I looked on Ebay yesterday and they're giving them away. You can get a Minolta Autometer IIIF for around $50 or a Flashmeter IV for less than $100. This is the most indispensable piece of equipment I own.
All camera meters are reflective. Personally, I want to know how much light is falling on the bridge of my subject's nose. Skin tones vary tremendously, so I'm not as interested in how much is bouncing back.
No matter how sophisticated a camera's metering system, it's still giving you some kind of a reflective average of some part of the scene. That's usually a good-enough approximation, but it's not exactly what you're looking for. You're better off exposing for the light coming in and letting the reflections take care of themselves. 90% of the time, there will be one part of the scene that you want to expose exactly correctly. The rest can be taken care of by looking in the viewfinder. If there are highlights that are going to blow, move your subject or yourself to an angle that either eliminates them or complements you point of emphasis. When all else fails, you can fix extremes with post-processing.
I've heard folks say that using a hand-held meter is too cumbersome. Takes too much time in fast-moving situations. I call BS. Figuring out whether to use matrix metering or center weighted or 10 or 3 or 1 degree spot or histograms or whatever, then trying to guess what the camera is thinking. That's cumbersome.
I was a photojournalist and shot more than my share of all kinds of action. I always had time to take 5 seconds to get a good incident reading. If you're indoors, walk over and take a reading by your subject. If you're outdoors, stand in light similar to your subject. (No matter how far you are from your subject you're both pretty much the same distance from the sun.)
Anyway, back to my original question. Are there any D70 users out there willing to share their thoughts on this box? Has anyone upgraded to a D200? How did it work out?
Thanks again,
--ken
Spent the long weekend reading up on this digital camera stuff and I've decided to go Nikon. Made this decision because I've got a relationship with their systems and some good, old glass that can still be used. Maybe not the best situation with new technology, but certainly not useless.
My quandary now is whether to go with a new D200 or a good used D70. In the past, that would have been an easy decision. When these were the tools of my trade, I was always shooting with one-generation-old technology. When everyone else was shooting with F3s, I used F2s. When the F4 came out, I snatched up a couple of discarded F3s. Made plenty of fine pictures that way.
My concern now is the pace of technology change. Digital photography is in its infancy. One reviewer's opinion is that 1 digital year is about 25 human years. So, 4-year-old digital technology is from the stone age.
Is that really true? It sounds like the D70 is a pretty good, battle-tested box which, over the last few years, has made a ton of perfectly fine images. Is it worth spending twice the money to get the newest and bestest?
One thing that caught my eye is that it sounds like the D200 is quite a bit sturdier than its older brother. I used to beat the snot out of my equipment back in the day, so that was important. Now, probably, not so much. I did read, though, that all the buttons and doors and every possible opening in the D200 is gasket sealed. I live in Seattle, so any camera I own is gonna get rained on. That's a big selling point for me.
I also read that the D200 will also work a little better with my old manual-focus lenses; mainly in the metering department. But neither will let you swap out the viewfinder glass, so I'm stuck with straight ground glass. That was never easy to focus on and my eyes aren't any younger. Guess I'll eventually be investing in at least a few AF lenses.
Tip (or rant, depending on your disposition) Of the Day
(I'm trying to give as much as I take on the board):
As far as camera metering is concerned, it doesn't interest me all that much. If you're at all serious about photography, get yourself a hand-held incident meter. I looked on Ebay yesterday and they're giving them away. You can get a Minolta Autometer IIIF for around $50 or a Flashmeter IV for less than $100. This is the most indispensable piece of equipment I own.
All camera meters are reflective. Personally, I want to know how much light is falling on the bridge of my subject's nose. Skin tones vary tremendously, so I'm not as interested in how much is bouncing back.
No matter how sophisticated a camera's metering system, it's still giving you some kind of a reflective average of some part of the scene. That's usually a good-enough approximation, but it's not exactly what you're looking for. You're better off exposing for the light coming in and letting the reflections take care of themselves. 90% of the time, there will be one part of the scene that you want to expose exactly correctly. The rest can be taken care of by looking in the viewfinder. If there are highlights that are going to blow, move your subject or yourself to an angle that either eliminates them or complements you point of emphasis. When all else fails, you can fix extremes with post-processing.
I've heard folks say that using a hand-held meter is too cumbersome. Takes too much time in fast-moving situations. I call BS. Figuring out whether to use matrix metering or center weighted or 10 or 3 or 1 degree spot or histograms or whatever, then trying to guess what the camera is thinking. That's cumbersome.
I was a photojournalist and shot more than my share of all kinds of action. I always had time to take 5 seconds to get a good incident reading. If you're indoors, walk over and take a reading by your subject. If you're outdoors, stand in light similar to your subject. (No matter how far you are from your subject you're both pretty much the same distance from the sun.)
Anyway, back to my original question. Are there any D70 users out there willing to share their thoughts on this box? Has anyone upgraded to a D200? How did it work out?
Thanks again,
--ken
more...
house Add slide backgrounds from
Pasquale
01-14 09:49 AM
Good gosh :D
tattoo Backgrounds Powerpoint
cagcwait
02-09 08:12 PM
Hi Bee-- Great post clarifiying the IV cause. I am a volunteer for IV, but my labour is still pending at PBEC (Jul 2002 CA EB2 RIR). When we met the Congress Persons in Bay Area last week, we did talk about the labour certification backlogs. In fact, the immigration staff at both the places were aware of the labour backlogs (even though one of them didn't know about the retrogression). IV is representing the labour certification backlogs and asking for transparency in the backlog centers.
So All -- whether we are stuck in labour or retrogression -- Let's rally together. Please join IV and strengthen our representation.
There is very little time left. Let us join together and present a united front under IV.
cagcwait
So All -- whether we are stuck in labour or retrogression -- Let's rally together. Please join IV and strengthen our representation.
There is very little time left. Let us join together and present a united front under IV.
cagcwait
more...
pictures Backgrounds for PowerPoint
manderson
06-14 03:00 PM
after
dresses welatest powerpoint slides
redgreen
01-31 11:53 AM
I saw the same thing in my online status, in october. What I got is a finger print notice which was originally sent to my old address which was on the I-485 application form. They redirected to it to the current address on file.
This is my guess: Since the online status has only few options, and may be the person who is updating it put it as 'document sent' and the one similar to that is the last one with 'Document production ....".
What I heard is, before they mail your GC, you will get a letter saying your I-485 is accepted. I never got that. I called USCIS and 'human robots' didn't have any idea on this, but they said my I-485 is still in the processing stage.
This is my guess: Since the online status has only few options, and may be the person who is updating it put it as 'document sent' and the one similar to that is the last one with 'Document production ....".
What I heard is, before they mail your GC, you will get a letter saying your I-485 is accepted. I never got that. I called USCIS and 'human robots' didn't have any idea on this, but they said my I-485 is still in the processing stage.
more...
makeup All of powerpoint slides to
ImmigrationAnswerMan
07-02 11:40 AM
It depends on why your L was denied. The standards for the L and the H are completely different. So usually a denial on an L will not be a factor in adjudicating an H petition. If your L was denied because you had not developed the company enough to show that it was a viable company at this point, then when you file the H they might question whether your company is large enough to warrant needing someone in your position (whatever the position may be).
girlfriend powerpoint presentations.
RNGC
02-12 10:03 AM
How about we greet Obama on President's day ?
Lets all send a Congratulations greeting card on the President day and mention "ImmigrationVoice.org" . Its not too late to do this. If they receive 1000s of these cards, defenitely IV will be take notice....
Admins - Is this a good idea, can we make this a action item ?
Lets all send a Congratulations greeting card on the President day and mention "ImmigrationVoice.org" . Its not too late to do this. If they receive 1000s of these cards, defenitely IV will be take notice....
Admins - Is this a good idea, can we make this a action item ?
hairstyles POWERPOINT SLIDES BACKGROUND
transpass
03-23 05:07 PM
Hello gurus,
need little help from you guys. Right now i am on H1b.
I am about to file my Family based I-485, I-130, I-765, I-131. on all these forms they are asking for A# ( Alien Registration Number).
I was on F1 visa before. so i have one expired EAD card which i got during my OPT in 2005. this card has a A#.
so should i put this A# on all forms( I-485,I-130,I-765,I-131) or leave it blank.???
H1bdude1
As far as I know, the OPT A# is different from what you will get from filing 140. Once you receive 140 approval notice, it should have the A# which you can use on 485...If you don't have one or don't know, leave it blank...
need little help from you guys. Right now i am on H1b.
I am about to file my Family based I-485, I-130, I-765, I-131. on all these forms they are asking for A# ( Alien Registration Number).
I was on F1 visa before. so i have one expired EAD card which i got during my OPT in 2005. this card has a A#.
so should i put this A# on all forms( I-485,I-130,I-765,I-131) or leave it blank.???
H1bdude1
As far as I know, the OPT A# is different from what you will get from filing 140. Once you receive 140 approval notice, it should have the A# which you can use on 485...If you don't have one or don't know, leave it blank...
greenguru
06-13 11:52 AM
A similar situation happened to a friend of mine. It is very easy, talk to a good lawyer and you should have them very soon..
My friend got the green card in 3 months.
Cheers,
My friend got the green card in 3 months.
Cheers,
scubadude
May 25th, 2005, 06:47 PM
Thanks for your replies. I'll see what I can do to improve.
No comments:
Post a Comment